Two lane Highway Truss Structure Steel Bridge 120m Construction
Two lane Highway Truss Structure Steel Bridge 120m Construction
2-lane Highway Truss Structure Steel Bridge 120m Construction
Following Construction's amazing success building the double-lane Highway Truss Structure Steel Bridge 120m in Easter Nepal, the local company was selected by the local government to build two even bigger and more important bridges.
These were to be two-lane highway Truss Structure Steel Bridge 120m, to BS/EN Standards, spanning 120m over fast flowing rivers. These were over the Sabha Khola and Arun Khola rivers.
The roads on one side of these bridges are currently near impassable tracks; on the far sides roads are currently virtually non-existent. The 2-lane Highway Truss Structure Steel Bridges will enable enormous cut-off areas to be accessed.
ZHM designed both of these to be erected without access into the river, because the Arun river was too fast and too deep to do anything else.
However the contractor chose to build the Sabha Khola bridge first; and because this river was more seasonal, to build it on supports instead of cantilever launching.
ZHM built a series of gabions and on these locally produced steel trestles. On these the lower steel chords were erected and braced. Then the intermediate chord, with the bracing and anti-collision steel, was added.
The construction took less than a year, when the normal time for a bridge construction in Nepal is 5 years. This is the biggest clear span bridge in the whole of Nepal.
When you arrive bouncing along the 50 miles or so of rutted track, the sight of the bridge is astonishing.
Installation of Steel Structures for Two lane Highway Truss Structure Steel Bridge 120m Construction
Types of Steel Structures for Two lane Highway Truss Structure Steel Bridge 120m Construction:
(1) Transversal Tie Beams
(2) Top Horizontal Longitudinal Tie Beams
(3) Bridge Front Portal Frames
(4) Rail Guide Support Bars
(5)Transversal floor beams
(6) Longitudinal steel beams
(7)Main steel trusses
(8)Lower horizontal longitudinal tie beams
Types of Steel Structures for Two lane Highway Truss Structure Steel Bridge 120m Construction:
(1) Wind load resistance Unit members
(2)Arch rib unit members
(3) Upper bridge surface area unit members
(4)Middle truss unit members
(5) Side truss unit members
(6) Lintel Crossarm Unit members
(7) Diagonal Bar Unit Members
(8) Lower Bridge Surface Unit Members
Types of Steel Structures for Two lane Highway Truss Structure Steel Bridge 120m Construction:
(1) Transversal Tie Beams
(2) Top Horizontal Longitudinal Tie Beams
(3) Bridge Front Portal Frames
(4) Rail Guide Support Bars
(5)Transversal floor beams
(6) Longitudinal steel beams
(7)Main steel trusses
(8)Lower horizontal longitudinal tie beams
(9)Diagonal members
(10) Main truss lower chords
(11) Bridge floor surface slab levels
- Pre:Two lane Highway Truss Structu 2024/4/13
- Next:120 metre Steel Truss Bridge C 2024/4/13